24
CONNECTING THE SPRAYER
drawbar
ATTENTION
Before cutting the bars, check for all possibilities of movement of the sprayer
on the lifting arms and third point.
Make sure the hitch pins locks are correctly installed.
For instructions in detail, please refer to the section MAINTENANCE - PTO
SHAFT.
- Mount the sprayer to the tractor three-
point suspension and level it as shown in the
figure beside.
h h
± 5 cm
± 5 cm
NOTE: Align the forks as shown by "A".
A
height
adjustment
- Adjust the tractor hydraulic lift lever so that
the sprayer is not raised too high.
- Remove or set aside the tractor drawbar.
- Adjust the PTO shaft. If necessary, cut the
male and female bars so that, after
connecting the sprayer, it has the overlaps
recommended in the figure beside.
Summary of Contents for CONDOR B-12
Page 2: ......
