5-83
5
M
A
INTE
NAN
CE
ADVANCE 2000
Table of operations
Periodicity
10 h or
daily
30h or
weekly
Every
100 h
Every
400 h
Every
500 h
Every
600 h
Before using the equipment for the first time,
clean and lubricate all the PTO shaft points.
Check the belt condition and tension.
•
Check the hydraulic fluid level (top up if
necessary).
•
Check for leaks around the stirrer’s mechan-
ical seal.
•
Check the tire pressure and adjust it if nec-
essary.
•
Check the oil level in the agricultural chemi-
cal pump.
•
Check, clean and wash the filter(s) in the
agricultural chemical circuit.
•
Wash the equipment externally.
•
Wash the spraying circuit components (main
filter and in-line filters).
•
Lubricate the lubrication spots.
•
Lubricate the articulation pins for the
booms and movable frame
•
Lubricate the universal joints on the PTO
shaft.
•
Check if mechanical agitator is working
properly.
•
Retighten the wheel nuts
•
Tighten the wheel bolts, the lateral support
shaft and the tank pipe.
•
Replace the oil in the agricultural chemi-
cal pump*.
•
Clean and inspect the pressure regulator’s
components.
•
Change the equipment’s belts.
•
Dismantle, check, wash the parts and lubri-
cate the wheel hubs.
•
Carry out the preventive maintenance on
the agricultural chemical pump.
•
Replace the machine’s hydraulic fluid.
•
Table of operations
Table 11: Operations
Summary of Contents for Advance 2000 AM-18
