Jacto Advance 2000 AM-18, Operator'S Manual

Page: 57 / 118

4-57
4
O
PE
R
A
TI
O
N
AN
D
A
D
JU
ST
M
ENT
S
ADVANCE 2000 Filling the reservoirs
Filling the main reservoir
There are two ways of filling the sprayer’s
main reservoir:
1. Through the filler unit
• Put 50 liters of water in the spray tank.
• Open the cover of the main reservoir;
• Disconnect the intake hose from the
chemicals mixer valve (2).
• Connect the filler unit (3) hose to the
bypass valve (1) hose.
cover of the main reservoir
ATTENTION!
When filling the reservoir, it is
recommended the use of IPE.
2
3
1
• Put the filler unit (3) in the water source
and the end of its discharge hose (4) at
the tank opening.
• Run the sprayer at 540 rpm at the PTO.
• Set the bypass valve (1) lever in the po-
sition of chemicals mixing.
• After filling, set the by pass valve (1)
lever in the working position (pointed
to the control) and connect again the
chemicals mixer (2) hose.