Jacto Advance 2000 AM-18, Operator'S Manual, Page: 41 / 118

2-41
2
A
S
SE
M
B
LY
ADVANCE 2000 Assembling the nozzles tubes and boom skid
• Start to install the nozzle tubes on the
central boom.
• Install the other part of the central branch
keeping 19.68 ou 13.77 between the cen-
ters of the nozzle-holders. After that, in-
stall the branches of the other sections.
• Feito isso, monte os ramais dos demais
segmentos.
• The position of the ot 19.68 ou 13.77 in.
between nozzles chosen at the time of
purchase.
• Mount the skids on the boom (A) between
the last two nozzle holders as shown, other-
wise the boom assembly can be damaged.
Assembly the boom skid
OBSERVATION!
The central boom branch is di-
vided into two parts: the part
which has three nozzle-holders
must be assembled so that the
furthest nozzle-holder from the
chemical mixture inlet on the
branch is aligned with the slid-
ing frame center.
A
19.68 or
13.77 in
19.68 or
13.77 in