Iwatsu ADIX VS, Technical Manual

Page: 45 / 136

Chapter 1 – Component Description
35
Switch S1001 Function
No. Name Function
1 Memory Clear OFF = Database Protect
ON = Database Default
2 ROM Sum Check ON: No Check, OFF: Check (Normal)
3 Not Used
4 Not Used
5 Mode ON: Program Loader, OFF: Normal
Reset Button S1002
System reset button.
)
To default the system database using the VS-CPU/MEM card:
1. Make sure all cards and station terminals are properly connected and powered up.
2. Set position 1 of switch S1001 on the VS-CPU/MEM card to the OFF posistion.
Note:
Position 2, 3, and 4 must be OFF.
3. Press the red reset button labeled RESET(Sw1002).
4. When CLR LED on the VS-CPU/MEM card begins to flash, return position 1 of switch
SW1001 on the VS-CPU/MEM card to the ON position.
Note: SW1002 must be turned on while the LED is flashing.