Iwatsu ADIX VS, Technical Manual

Page: 108 / 136

ADIX-VS Technical Manual Section 3 – ADIX-VS Installation
98
Programming Music On Hold (MOH)
The ADIX-VS System can be programmed to play music on hold using an external MOH source.
)
Installation and Programming
1. Access the programming mode from a programming KT,or PC Programmer.
2. Set the data filed to 1- External Music on Hold Source and Press[ENTER]
3. Connect the output from the MOH source to the green and yellow wires of a modular jack.
4. Connect the output from the MOH source control relay to the red and black wires of a
modular jack.
5. Plug the output from the modular jack into the MOH modular jack on the VS-MAIN
(motherboard) card using an industry standard base cord as illustrated in Figure 49.
Note:
The MOH control relay is normally open. The contacts close when a trunk is placed on hold.
BAT1 BAT2
CN1
DC
OUTPUT
AC
1
0
CN6
CN2
1 2 3 8 7 6 5 4
s1
SLT2
SLT1
KT6
KT5
KT4
KT3
KT2
KT1
PC/MODEM
BK
PRNTER
MOH
G
Y R
MOH
Source
Control
Relay
Output
Battery
+ -
Modular Jack
FIGURE 49. WIRING FOR AN EXTERNAL MOH SOURCE
Pin No. Color Function
1 White MOH Relay Control
2 Black MOH
3 Red Not used
4 Green Not used
5 Yellow MOH
6 Blue MOH Relay Control