Iwatsu ADIX VS Technical Manual Download Page 111

Page: 111 / 136

Chapter 6 – Optional Feature Installation

101

Using ADIX PC Programmer

Follow the directions below to use the ADIX PC Programmer interface to program the ADIX-VS
Telephone System.

Note:

ADIX PC Programmer saves the database as a series of files with extentions. The file extensions

for ADIX-VS databases are .KVA – .KVZ . This does not include file extension .KVY.

)

Accessing ADIX PC Programmer:

Download the database from the ADIX-VS to the PC.

From the Mainu menu, select Program Database.

From the Programming menu, select System Data Edit.

From the System menu, select ADIX-VS.

In the Database Edit window, input the file of the database.

Select the Edit Method.

You may now access the programming Classes and Items used by the ADIX-VS.

Summary of Contents for ADIX VS









































































































































Search results

Summary of Contents for ADIX VS

Reviews:

Related manuals for ADIX VS

Brands by name

Popular brands

Iwatsu ADIX VS, Technical Manual

Search results

Summary of Contents for ADIX VS

Reviews:

Related manuals for ADIX VS

Brands by name

Popular brands