Iwatsu ADIX VS, Technical Manual

Page: 106 / 136

ADIX-VS Technical Manual Section 3 – ADIX-VS Installation
96
Remote Control
Flexible relays on the VS-MISC card can be used to control a customer provided device such as an
electric door lock.
)
Setup and Programming:
1. Access the programming mode from a programming KT,or PC Programmer. Go to Class 04
Item 35-MISC Function Port and program the miscellaneous logical port location of the
relays and the relay numbers on the VS-MISC card to used for remote control applications.
2. Go to Class 04 Item 36-MISC Relay Timer and program the length of time the relays will
operate for.
3. Go to Class 04 Item 37-MISC Function and program the type of relays you ar using.
4. Go to Class 14 Item 01-Flexible Key Assignment and/or Class 15 Item 01-Attendant Key
Assignment and program a [REMOTE] key to operate the remote control application.
5. Connect the device to be controlled through slave relays to L1 through L2 on the punchdown
block (corresponding to relay numbers 1 to 8 assigned above)as illustrated in Figure 47.
28
27
26
25
32
4
3
2
1
Device to
Control
Relay
Control
PDevice to
Control
Relay
- +
Control
24 Vdc
FIGURE 47. REMOTE CONTROL WIRING