Iwatsu ADIX VS, Technical Manual

Page: 107 / 136

Chapter 6 – Optional Feature Installation
97
Night Mode Switch
A universal night switch can be installed to manually switch the system into night mode.
)
Setup and Programming:
1. Access the programming mode from a programming KT,or PC Programmer. Go to Class 04
Item 31-Night Mode Start Time and program automatic night mode start time if desired. The
default setting is 0-No automatic Switching.
2. Go to Class 04 Item 35-MISC Function Port and program the miscellaneous logical port
location of the sensor on the VS-MISC card and the sensor number which will be used as a
night mode switch.
3. Go to Class 04 Item 37-MISC Function and program the sensor type.
4. Connect a push-on/push-off or toggle type switch to SENS1 throuh SENS2 on the
punchdown block corresponding to the sensor number assigned in programming as illustrated
in Figure 48.
32
31
30
29
4
3
2
1
Sensor/Switch
Sensor/Switch
FIGURE 48. NIGHT MODE SWITCH