Iwatsu ADIX VS, Technical Manual

Page: 39 / 136

Chapter 1 – Component Description
29
VS-MAIN Switch S1 Function
Switch S1 is used to set the function for the serial port connectors on the VS-MAIN Motherboard
Card.
Function Postion
Connector
Description
OFF ON
1 PC Sets the function of the PC connector
to either PC Programmer or Debug
Console Mode PC Programmer Mode Debug Console Mode
2 PC Select Direct or Modem as the
connection mode for the PC
Programmer PC Serial Port Modem
3 PC Sets the Baud Rate of the PC
Connector 9600 BPS 4800 BPS
4 PC Sets the Data Bits and Parity of the
PC Connector 8 bits / Non-Parity 7 Bits / Even Parity
5 Not Used
6 PRN Sets the Baud Rate of the PRN
Connector 9600 BPS 4800 BPS
7 PRN Sets the Data Bits and Parity of the
PRN Connector 8 bits / Non-Parity 7 Bits / Even Parity
D8 PRN Sets the PRN Connector Flow Control DTR and X ON / X OFF DTR Only
VS-MAIN LED Indication
No. Name Color Function
D1 ISDN #1 Master Indication Red ON = slot #1 ISDN is working as the master clock.
D2 ISDN #2 Master Indication Red ON = slot #2 ISDN is working as the master clock.
D3 ISDN #3 Master Indication Red ON = slot #3 ISDN is working as the master clock.
D4 ISDN #1 Synchronization Indication Green ON = slot #1 ISDN is synchronized with the network.
D5 ISDN #2 Synchronization Indication Green ON = slot #2 ISDN is synchronized with the network.
D6 ISDN #3 Synchronization Indication Green ON = slot #3 ISDN is synchronized with the network.
D7 Not Used Factory Test purpose only
D8 Not Used Factory Test purpose only