Iwatsu ADIX VS, Technical Manual

Page: 79 / 136

Chapter 2 – Emergency System Back-Up
69
Installing External Batteries
)
To install an external backup battery in an ADIX-VS system:
1. Remove the front panel.
2. Feed the battery cable through the opening space on the lower left or right side of the
VS-KSU.
3. Connect the batteries PE-12V7 to the connectors marked BAT1 and BAT2 on the VS-PWSU
power supplies as illustrated in Figure 34. The red conductor is po) and the black
conductor is negative(-).
BAT1 BAT2
CN1
DC
OUTPUT
AC
1
0
Cable to
External
Batteries
FIGURE 34. EXTERNAL BATTERY CONNECTION.
Caution! Danger of explosion if the battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer. Dispose used batteries according to the
manufacturer’s instruction.