Iwatsu ADIX VS, Technical Manual

Page: 59 / 136

Chapter 2 – Station Equipment
49
HOLD Button
— Press the HOLD button to put the current call on hold or set the Do Not Disturb
feature.
MEMO (Memory) Button
— The MEMO button is used to store in memory and access up to 20
numbers and feature access codes.
Programmable Feature Buttons (F1-F3)
— The key assignment of the F1, F2 and F3 buttons
corresponds to the programming of the first three multipurpose buttons on the Host Telephone.
ICM Button (F4)
— The ICM (F4) button allows you to access the other system extensions.
LEDs
— The four LEDs correspond to the F1-F4 buttons. An LED will light or flash when the line or
feature of the corresponding button is in use.
Ringer/Handset Volume Control
— Use this button to select the ringer volume and the handset
volume.
IX-DDPH Digital Doorphone
The IX-DDPH digital doorphone allows visitors to make an intercom call to gain entrance to your
building. This unit is connected to a VS-4PSUB port using #22 AWG one-pair twisted wire. One of
four doorphone chime tones can be selected through database programming.
Model:
IX-DDPH
Options:
None
Order No.: 076900 Related
Features: Call button, microphone Hardware: 1 VS-4PSUB port
Size: 5.3”H x 4.0”W x 2.0”D
Weight: 0.7 lbs.
FIGURE 19. ADIX DIGITAL DOORPHONE