IWAKI IX-C060 S6 FA-RF, Instruction Manual

Page: 72 / 84

72
Speci fi cations/Outer dimensions
Specifications
Information in this section is subject to change without notice.
■ Pump
Model code
Flow rate
L/H
Discharge
pressure
MPa
Power con-
sumption
W
Current
value
A
Connection
Weight
kg
IX-C150 TC/TE
R
0.2-150 0.4
62 0.8
R3/4
9
FJ JIS10K20A
IX-C150 S6
R R3/4 11
FJ JIS10K20A 13
IX-C060 TC/TE
R
0.08-60 1.0
R1/2
9
FJ JIS10K15A
IX-C060 S6
R R1/2 11
FJ JIS10K15A 12
*The above information is based on pumping clean water at rated voltage and ambient temperature.
* Pressure overload protection will stop operation when a discharge pressure has risen 1.5 to 2 times higher than the maxi-
mum level.
*Allowable room temperature: 0-50°C
*Allowable liquid temperature: 0-50°C (TC/TE), 0-80°C (S6)
*Allowable power voltage deviation: Within ±10% of the rated range
*Ambient humidity: 30-90%RH (Non condensing)
* When running the IX-C150 S6 at or below 1L/H or the IX-C060 S6 at or below 0.4L/H, an actual
fl ow rate may not meet a
target rate.
* Noise level: 70dB(A) for the TC and TE types and 80dB(A) for the S6 type.
■ European power cable
Conduction section area 0.75 [mm
2
] Triplex cable (L/N/PE)
Length 2000 [mm]
Standard H03VV-F
Terminal treatment European plug
■ Australian power cable
Conduction section area 1.0 [mm 2 ] Triplex cable (L/N/E)
Length 2000 [mm]
Standard H05VV-F AS3191
Terminal treatment Australian plug
■ Body colour
Blue Munsell colour system 7.5PB 3/8
Speci fi cations/Outer dimensions