27
Ins
tal
lation
Wiring
Wiring
Wiring for power voltage, earthing and external signals.
Points to be observed
Observe the following points during wiring work.
•
Electrical work should be performed by a quali
fi
ed operator. Always observe applicable
codes or regulations.
•
Observe the rated voltage range, or the electrical circuit in the control unit may fail.
•
Do not perform wiring work while electric power is on. Otherwise, an electrical shock or
a short circuit may result. Be sure to turn off the power before wiring work.
•
Be careful for electric power not to be turned on during work.
•
Replacement of a power cable should be conducted by a manufacturer, his agency or a
skilled person. Otherwise, an accident may result.
End terminals
See the following diagram for detail.
AUX
STOP
Output
EXT
Fieldbus
Power cable (1950mm)
Summary of Contents for IX-C060 S6 FA-RF
Page 49: ...49 Operation Language selection Operation programming...
Page 82: ...82...
Page 83: ...83...
