11
S
afe
ty
in
st
ru
cti
o
n
s
• Keep the pump free from any effect of piping expansion and contraction
due to thermal stress.
• Pressure overload protection will stop operation when a discharge pres-
sure has risen 1.3 to 2.0 times higher than the maximum level. Install a
relief valve to depressurize a discharge line if its pressure resistance will
not bear the possible highest pressure.
• Be careful not to drop the pump onto the
fl
oor. A strong impact may reduce
pump performance. Do not use a pump which has once damaged. Other-
wise an electrical leak or shock may result.
• The pump is water-/dust-proof of IP65, but is not totally waterproof. Do not
have the pump wet with the liquid handled or rainwater.
• Never wet the pump head, control unit and drive unit. Otherwise, failure or
an accident may result. Immediately wipe off liquid if the pump has got wet.
• Do not close a discharge line during operation. Otherwise, liquid may leak
or piping may break. Install a relief valve to be sure to prevent a leak or a
piping break.
• Release pressure from a discharge line before dismantling the pump or
removing piping. Otherwise, chemical liquid gushes out.
• Be careful not to come in contact with residual liquid.
• Do not clean the pump or nameplate with a solvent such as benzine and
thinner. This may discolour the pump or erase printing. Use a dry cloth or a
wet cloth with water or neutral detergent.
• The S6 type may fall down due to the weight of its stainless pump head.
Do not tilt the pump head forward in transit, installation and dismantlement.
Precautions for use
Caution
Caution
Caution
Requirement
Benzine
Thinner
Caution
Caution
Caution
Caution
Summary of Contents for IX-C060 S6 FA-RF
Page 49: ...49 Operation Language selection Operation programming...
Page 82: ...82...
Page 83: ...83...
