39
Ope
ra
tio
n
Menu screen
Push the MENU key in the MAN/EXT selection mode and call up the menu screen. Use the right and left keys
to scroll through each menu item and then push the Enter key to make a selection. Pushing the MENU key
again or ESC key in the menu screen, the previous mode will be recalled.
EXT mode selection
The pump can run in four different operating modes of Analogue,
Pulse, Batch and Interval Batch for the external signal. See page
14, 15 and 40 for detail.
Calibration
Calibrate the pump to obtain a correct
fl
ow rate on the screen.
See page 35, 36 and 42.
Signal input setting
Program STOP, Pre-STOP, Interlock functions and diaphragm
rupture detection. See page 17, 18, 42 and 43.
Alarm 1 setting
Enable or disable the Alarm 1 for STOP, Pre-STOP, Interlock and/
or diaphragm rupture detection. See page 19 and 44.
Alarm 2 setting
Enable or disable the Alarm 2 for STOP, Pre-STOP, Interlock and/
or diaphragm rupture detection. See page 19 and 45.
Data logging
The pump can display operating time, total
fl
ow volume, power-on
time, the number of ON/OFF and software version. See page 46.
Programming of other functions
Program a suction speed, an AUX speed, a diaphragm position,
anti-chattering,
fl
ow rate unit and your language. See page 19, 47,
48 and 49.
Operation programming
Summary of Contents for IX-C060 S6 FA-RF
Page 49: ...49 Operation Language selection Operation programming...
Page 82: ...82...
Page 83: ...83...