IVT ESG-650, Instruction Manual

Page: 6 / 44

6
EN
Instruction manual
PART LIST
1. Paint cup
2. Pick up tube
3. Compressor unit
4. Retaining ring
5. Air cap
6. Lid washer
7. Needle assembly
8. Fluid adjustment knob
9. Spray gun trigger
10. On / Off switch
11. Spray gun storage tray
12. Air hole
13. Nozzle
14. Viscosity cup
15. Flexible air hose
CONTENT OF THE BOX
Instruction manual (1 pc), gun (1 pc), paint cup (1 pc),
flexible air hose (1 pc), viscosity cup (1 pc), needle (1
pc).
INTENDED USE
This machine is intended for spraying a coating (paint,
ink, varnish, etc.) through the air onto a surface. It
employs compressed air to atomize and direct the paint
particles.
SAFETY REGULATION FOR THE USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user’s manual and all other literature supplied
with your tool for any future reference.
Comply with all the safety information and the warnings
on the tool.
Be familiar with the controls and the proper use of the
tool before attempting to use it and above all, make sure
you know how to stop to use it in case of emergency.
Following these simple instructions will also maintain
your tool in good working order.
∙
The tool must be assembled correctly before use.
∙ Only use the tool for its designed purposes.
∙
On the tool, there may be also decals and further
indications about the safety equipment to use that
must be considered. The prevention of accidents is
dependent upon the awareness, common sense and
proper training of everyone involved in the operation,
transport, maintenance and storage of the tool.
∙
Never leave the tool unattended.
∙ Never allow children to use the tool. Children
should be supervised to ensure that they do not play
with the tool.
∙
Keep children and pets away. All onlookers should
be kept at a safe distance away from the tool when it
is in use.
∙ The user is responsible for third parties while
TOOL SPECIFICATIONS
Model ESG-650
Voltage ~ Frequency [V ~ Hz] 230 ~ 50
Rated power [W]
650
No-load speed [RPM] 32000
Max. flow [ml/min] 250
Nozzle diameter [mm] 1.8
Paint cup capacity [L]
0.8
Flexible air hose length [m] 1.5
DIN 130
Air pressure [bar] 0.3
Vibration level [m/s
2
] 0.016 (K=1.5)
Sound pressure level [dB(A)] 85 (K=3)
Sound power level [dB(A)] 85 (K=3)
Weight [Kg] 2.1
Safety class
II