Isgus Perfect 2020, Operating And Installation Manual

Page: 28 / 52

22 Programming
Programming
After calling up the programming routine the column pointer marks the corresponding
symbol on the programming panel. The menu items have to be selected and
programmed or confirmed in chronological order. The current program menu is
marked by the column pointer.
The different parameters are entered via code-numbers which can be selected using
"
R ".
Using the "
S " key you skip to next parameter or menu item. If not all required values
are entered for a menu item, the " S " key will not move you to the next.
If you do not want to change any values in a menu item you can check every value
using "
E ".
See also section "Programming panel".
The programming includes the menu items "Daylight saving time", " "Column change
timing", "Card lift / line change timing", "Ribbon color change", "Signal circuit / Check
of individuals (option)".
Calling up the Programming Routine
Calling-up the programming routine is protected by a code number.
Code number:
4 7 1 1
→
Allows the user to program time specific values of the unit.
If a wrong code-number is entered, the programming mode exits automatically. The
programming mode can also be left using "
S ".
To call up the programming routine, the front cover of the unit must be removed. If
the unit is switched off, you must switch it on with the power switch.
Warning!
Do not touch any live electrical components or parts!
Only trained staff should service the unit.