Changing the Ribbon
39
Shift punching upwards using "
R
" (+).
)
The distance between bottom line and
punching is increased.
Shift punching downwards with "
E
" (-).
)
The distance between bottom line and
punching is decreased.
4.
Insert time card and make a sample punching.
5.
Repeat steps 3 and 4 until punching is printed
in correct position.
Press "
S
" to confirm and to continue with
adjustment of the column change.
6.
D3
Adjust column change
Display = Adjustment value
50 = 0 mm, no correction
Value range:
00 - 99
Shift punching to the right with "
R
" (+).
)
The distance between left card edge and
punching is increased.
Shift punching to the left with "
E
" (-).
)
The distance between left card edge and
punching is decreased.
7.
Repeat adjustment and sample clocking until
the horizontal position of the clocking is correct.
Press "
S
" to quit adjustment routine.
Changing the Ribbon
To change the ribbon the programming panel has to be swung out. The column
pointer has to be moved to the park position.
Hint
The ribbon used in the unit is a special ribbon. If you want to
order further ribbons, please contact your local dealer or e-mail
us at:
or
+
Summary of Contents for Perfect 2020
