Isgus Perfect 2020, Operating And Installation Manual

Page: 21 / 52

Getting Started 15
All units have been programmed in the factory with current date and Eastern
Standard Time (EST). However, if the recorder was previously switched on, or
if your time zone is not Eastern Standard Time, you have to re-set the time
and date displayed.
.
D1 D2 D3
D2 = Hours, D3 = Minutes
For more details on setting date and time, see section "Setting the Time and
Date".
3.
Close the unit and locking it.
See section "Close the Recorder".
The recorder is now ready for operation. The current time is shown on the
analogue clock and current date is shown on the display.
In order to learn how to handle the recorder, you should do some sample
punches with blank time cards. See also section "Punching at the Recorder".
Programming Panel
Fig. 11: Programming Panel
(1) Column pointer (2) Programming panel
(3) Programming keys R , E and S (4) Programming-LEDs 1 - 7
(5) 6-digits display
.
D1 D2 D3
. . . . .
1 2 3 4 5 6 7
R E S
1
2
3
4
5