Isgus Perfect 2020, Operating And Installation Manual

Page: 33 / 52

Programming 27
Card Lift / Line Change timing
In this menu the time has to be entered from which on the punching shall be printed
in the corresponding line.
Two time values must be programmed.
→
Time value for the start position of the card lift in the upper print field.
→
Time value for the end position of the card lift in the lower print field.
The position for any punching between the two values is defined by the unit
automatically.
Any punching beyond the time range defined will be printed in the same height as
start or end position.
The programmed values are valid for all weekdays.
Proceeding
1.
D1 D2 D3
.
D1 = print field
01 = upper print field
Define hour in field D2 using " R ".
Value range: 00 - 23
Define minute in field D3 using " R "
Value range: 00 - 59
Confirm each field using " E ".
2.
D1 D2 D3
.
D1 = print field
00 = lower print field
Define hour in field D2 using " R ".
Value range: 00 - 23
Define minute in field D3 using " R "
Value range: 00 - 59
Confirm each field using " E ".
3. Quit menu "Card lift / line change timing" using
"
S " and advance to next menu item "Ribbon
color change".