Isgus Perfect 2020, Operating And Installation Manual

Page: 22 / 52

16 Getting Started
Column pointer
Mechanic pointer, marks the current programming symbol and step in programming
mode. In normal operation, the column pointer marks the current IN / OUT column in
which the time punches will be placed on the time cards.
Symbols
Chronological order of the programming steps as menu general terms presented as
symbols.
→
Set date and time
This symbol is not part of the programming routine and is activated
by a separate key. See section "Setting Time and Date"
→
Daylight saving time change-over
Several modes are available.
See section "Programming - Daylight saving time change-over"
→
This symbol contains no menu item.
Together with the following symbols it indicates the programming of
time specific events.
→
Column change timing
Determines the times for the column changes per weekday.
See section "Programming - Column change timing".
→
Card lift / line change timing
Determines the times for the card lift / line change per weekday.
See section "Programming - Card lift / line change timing".
→
Ribbon color change
The print color can be red or black. The times for the ribbon color
change can be defined for each weekday.
See section "Programming - Ribbon color change".
→
Signal operation
For the control of signal circuit or check of individuals. External signal
devices such as bells or horns can be driven via the signal output of
the unit. Check of individuals optionally.
See section "Programming - Signal circuit" and "Check of
individuals".
→
Signal out-programming
Programming of the times to switch on/off signal circuit/check of
individuals.
See section "Programming - Signal out programming".