Copyright 2021 Iron Bow Technologies
15
To attach the MedView to the top plate of the mounting bracket carefully place the
MedView on a flat surface facing downwards being careful not to apply any pressure to
the camera assembly.
The MedView is then attached to the top plate using the supplied three M4 bolts, plus one
¼-20 bolt. When the MedView is attached to the top plate with the front of the system
aligning with the front of the mounting plate, an access hole for a screwdriver is available
to tighten the ¼-20 bolt, as shown above.
Depending upon where the front of the MedView is required in relationship to the front
of the display, the system can be attached ant one of five different locations on the top
mounting plate. Figure 9. Above, shows the various front to rear attachment locations on
the top plate which align with the attachment holes in the base of the MedView system.
Figure 11. shows the central and rear positions when the MedView is attached to the
mounting plate. It can be seen that different locations and combinations of the M4 and ¼-
20 bolts are used dependent on the selected front to rear attachment points.
Figure 11. Attaching the MedView to the Mounting Bracket
Figure 12. Alternate mounting plate attachment locations
