Copyright 2021 Iron Bow Technologies
26
Changing Standby Settings
The default system configuration goes into standby mode after 1 minute with no activity.
You can change this setting to disable standby mode or change the delay after which the
system goes into standby.
To change standby settings, navigate to
Setup>System Configuration>Standby.
To disable stand-by mode:
Set
Standby Control
to
Off
.
To enable stand-by mode:
Set
Standby Control
to
On
and set a
Standby delay time
Set Standby Delay:
Input the required number of minutes between 1 and 480.
Save Configuration changes:
Select
Save
