Copyright 2021 Iron Bow Technologies
19
Assembling the 200mm/300mm MedView Mounting Bracket
To attach the adaptor bracket to the base bracket, line up the three slots in adaptor plate
with one of the sets of three attachment holes in the mounting plate using the provided
bolts. As shown in Figure 12. there are three different sets of mounting holes in the base
mount where the adaptor plate can be attached. As the adaptor incorporates a series of
slots, fine height adjustment is available to allow the MedView to sit flat on top of the
display.
Figure 18. Assembling the 200mm/300mm Mounting Bracket
