Copyright 2021 Iron Bow Technologies
25
MedView Administration
You can modify the default functions of the MedView codec by logging in as an
administrator to the codec web interface and performing the desired changes.
For the complete set of instructions, please refer to the
Cisco Webex Codec plus
Administrator Guide:
https://www.cisco.com/c/en/us/support/collaboration-endpoints/spark-room-kit-
series/products-maintenance-guides-list.html
Accessing the Codec Web Interface
To access the web interface:
1.
In your web browser address line, enter the system IP address, for example,
http://10.11.12.13
.
2.
Enter the Admin ID as the user name (default is:
admin
), and enter the Admin
Remote Access Password, if one is set.
3.
The Admin screen can now be used to navigate through the menus to the required
location to change a setting, as outlined in the following pages.
4.
It is important that after any changes to the configuration are made these are
saved using the
SAVE
button in the top right hand corner
