Copyright 2021 Iron Bow Technologies
11
Wall Mounting
The MedView flexible mounting arrangement allows a variety of commercially available ceiling
and wall brackets to be used, as well as custom brackets available for Iron Bow, described below.
In selecting a commercial bracket, it is strongly recommended a device that will support 20
pounds is used.
Inverted Operation
In order to mount the MedView in an inverted mode, it is necessary to electronically “Flip” the
image from the camera. This is achieved by removing the cover on the top of the MedView,
directly behind the camera head. Once the cover has been removed, the “Flip” switch is revealed
below the chassis allowing the camera electronic orientation to be changed.
Figure 4. MedView attached to Commercial Wall Mounting Bracket
Remove
Cover
Image Flip Switch location
Camera Body
location
OFF ON
Image Flip Switch location
Top View of MedView Chassis
Figure 5. Camera Orientation Switch
