Copyright 2021 Iron Bow Technologies
32
Control Panel Functions
The MedView Tethered Remote control panel buttons functions are described below:
Connecting Tethered Remote Control to MedView System
The Tethered Remote Control is connected to the USB 2 port
on the rear of the MedView system as shown in Figure 31.
Ensure the Control Panel is connected before powering the
MedView system.
Description:
1. Pan and tilt the camera
(2nd function: moves self-view PIP)
2. Zoom camera in.
3. Zoom camera out
4. Decrease speaker volume.
5. Increase speaker volume
6. Accept new PIP Location
7. ESC. - Reset Camera
8. Answer incoming call/place call
9. End or reject call
10. Mute/Unmute microphone
11. Enable/Disable video privacy
12. Display/Transmit presentation source
13. Enable/Disable Self View Mode
(2nd function: Activate PIP Location)
Figure 29 – Tethered Remote Control Functions
Figure 30 – Connecting the Tethered
Remote Control
