Copyright 2021 Iron Bow Technologies
31
Appendix.
3. – Tethered Remote Control
As an option for the MedView, a tethered remote control is
available that can be used within the room for controlling basic
system functions, as outlined below. The tethered remote control
is fitted with a coiled cable which is a nominal 28” in length when
fully closed and can expand to approximately 60” when fully
extended.
As the Tethered Remote Controller is tethered and uses a Tactile
Membrane panel, it does not require batteries, is not easily lost or
misplaced and can easily be cleaned.
The Tethered Remote Controller is supplied as standard with a
wall mounting holder are shown in Figure that can be attached in
a suitable location via either two screws M4 countersink screws or
using an adhesive tape (not supplied). The dimensions of the wall
mounting are shown in Figure. 31.
Figure 27 – Tethered Remote
Controller System
Figure 28 – Tethered Remote
Controller Holder
