Inf
o
rm
at
io
n
an
d
Non
-c
o
nt
rac
tua
l v
isu
al
s.
Sub
je
ct
t
o
t
ec
hn
ic
al
c
ha
ng
e wi
tho
ut
no
ti
ce
.
This document is the property of IRFTS. It shall not be reproduced or shared with third party without agreement IRFTS
9.5)
Installation of the EASY-ROOF system
Tightening torque 8.8 Nm
46
Model "M-1" 60 Cells 6" Landscape
1) Place the middle bracket (6 or 7) with the anti-rotation wedge above the middle bracket and between
two modules, the clamp leaning on the PV modules.
2) Slide to encase it on the bracket.
3) Slick the modules against the anti-rotation wedge.
4) Screw with
screws CHc M6 x 30 (12) or CHc M6 x 40 (11) depending on the thickness of the PV module.
3) Attach the PV modules at the top of the field with end clamps (5 or 16) with screw socket head cap M6
x 30 (12) or M6 x 40 (11) depending on thickness of the PV module. Same assembly on the lower part
without the maintaining wedge.
Note: for panels below 1650 mm length, shift the panel to the left
to have a minimum of 10 mm overlap with the frame
as shown here.
10 mm mini
