Inf
o
rm
at
io
n
an
d
Non
-c
o
nt
rac
tua
l v
isu
al
s.
Sub
je
ct
t
o
t
ec
hn
ic
al
c
ha
ng
e wi
tho
ut
no
ti
ce
.
This document is the property of IRFTS. It shall not be reproduced or shared with third party without agreement IRFTS
10 mm set
10 mm set
Installation of the EASY-ROOF system
1) Set up another frame on the first line. Align it to the reference board as shown on page 33.
Encase an mounting tool between at the top of the two lower frames. At least two mounting
tools are required to build the system.
2) a) When assembling 4 brackets, screw the frame on the board in the hole provided for this purpose,
then screw the middle brackets into the slots with stainless screws 6x40 (10) ..
b) When assembling 6 brackets, place the top frame and place a middle bracket into place and screw
on the board. If there is no frame at the top, screw the end bracket into its slot, using stainless steel
screws 6x40 (10)
THE USE OF MOUNTING TOOLS IS MANDATORY TO ASSEMBLE THE
WHOLE SYSTEM.
35
9.4.2)
Model "M-1" 60 Cells 6" Landscape
6 brackets middle of the
field
Hole for the screw
that maintains the
frame
(4-bracket assembly)
Center
the
bracket
in
the horizontal direction into the
positioning hole
