Inf
o
rm
at
io
n
an
d
Non
-c
o
nt
rac
tua
l v
isu
al
s.
Sub
je
ct
t
o
t
ec
hn
ic
al
c
ha
ng
e wi
tho
ut
no
ti
ce
.
This document is the property of IRFTS. It shall not be reproduced or shared with third party without agreement IRFTS
9.5)
Installation of the EASY-ROOF system
1) Position and fit the PV modules. See page 47 for grounding.
Raise the PV modules slightly to place the corresponding wedge to the size of the panel and then bear
against the wedge.
Tightening torque 8.8 Nm
7) Place all middle brackets of the PV field
45
Model "M-1" 60 Cells 6" Landscape
2) Adjust the height of the support screws of the end clamp so that they are flush
with the top of the PV
module.
3) Attach the PV modules at the bottom of the field with end clamps (5 or 16) with screw socket head
cap M6 x 30 (12) or M6 x 40 (11) depending on thickness of the PV module.
PV Module
(end clamp)
