IPOX N9000 Series User Manual Download

Page: 88 / 143

IPOX NVR N9000 Manual

“

Clear

”

to delete the alarm area.

⑤

Click

“

Apply

”

to save the settings.

⑥

Click

“

Processing Mode

”

to go to the alarm handling configuration interface of face

detection.

Face Detection Alarm Handling Configuration:

①

Click Start

→

Settings

→

Alarm

→

Face Detection to go to the following interface.

②

Enable or disable

“

Snapshot

”

“

Push

”

“

Alarm-out

”

“

Preset

”

“

Buzzer

”

“

Pop-up

Video

”

and

“

E-mail

”

. The alarm handling setting of face detection alarm is the same as the

sensor alarm (see 9.1 Sensor Alarm for details).
Click “Apply” to save the settings. You can click “Face Detection Config” to go to the face
detection configuration interface.

9.4.2 Face Match

①

Click Start

→

Settings

→

Alarm

→

Face Match to go to the following interface.

②

Select the camera and then enable and click

“

Configure

”

under General to set the general

configuration of face match.

⚫

Enable general and select the schedule.

⚫

Set the text and audio prompts of successful match and failed match as needed. Click

upload the audio.

⚫

Select groups and set their similarity.

⚫

Enable alarm output pulse as needed.

⚫

Click “Copy To” to copy all settings to other cameras.

Summary of Contents for N9000 Series
















































































































































Search results

Summary of Contents for N9000 Series

Reviews:

Related manuals for N9000 Series

Brands by name

Popular brands

IPOX N9000 Series, User Manual

Search results

Summary of Contents for N9000 Series

Reviews:

Related manuals for N9000 Series

Brands by name

Popular brands