IPOX NVR N9000 Manual
IPOX NVR N9000 Manual
85
Configure the trigger alarm-out in the window. The system will trigger the alarm-out automatically
when the sensor alarm is triggered. You need to set the delay time and the schedule of the alarm
outputs. See 9.6.1 Alarm-out for details.
Preset:
check it and then the “Trigger Preset” window will pop up automatically. Configure the
trigger preset of each camera. To add presets, please see 6.2 Preset Setting for details.
Buzzer:
if enabled, the system will begin to buzz when the sensor alarm is triggered. To set the
delay time of the buzzer, please see 9.6.4 Buzzer for details.
Pop-up Video: After camera setting, the system will pop up the corresponding video automatically
when the sensor alarm is triggered. To set the duration time of the video, please see 9.6.3 Display
for details.
Pop-up Message Box:
if enabled, the system will pop up the corresponding alarm message box
automatically when the sensor alarm is triggered. To set the duration time of the message box,
please see 9.6.3 Display for details.
E-mail:
if enabled, the system will send an e-mail when the sensor alarm is triggered. Before you
enable the email, please configure the recipient’s e-mail address first (see 12.1.5 E-mail
Configuration for details).
9.2 Motion Alarm
Motion Alarm:
when the motion object appears in the specified area, it will trigger the alarm. You
should enable the motion of each camera first and then set the alarm handling of the camera to
complete the whole configuration of the motion alarm.
9.2.1 Motion Configuration
①
Click Start
→
Settings
→
Camera
→
Motion to go to the following interface.
