IPOX NVR N9000 Manual
IPOX NVR N9000 Manual
116
RTSP Port:
RTSP real-time stream protocol can be used to control the sending of real-time data.
By media player (like VLC player) which supports the RTSP real-time stream protocol, you can
view the live images synchronously. The default RTSP port is 554 and it can be changed as needed.
(The address format: rtsp://IP address:554/chID=1&streamType=main or rtsp://IP
address:554/chID=1&streamType=sub; main indicators main stream; sub indicators sub stream;
chID indicators channel ID).
Examples:
①
Enable RTSP and
“
Anonymous
”
. Then open the VLC player and enter the address
(for example: rtsp://192.168.1.88:554/chID=1&streamType=main) in the network address bar of the
VLC player. Then you can view the video of channel 1.
②
Enable RTSP and open the VLC player. After that enter the address (for example:
rtsp://192.168.1.88:554/chID=1&streamType=sub) in the network address bar of the VLC player.
Then a login box will pop up. Enter the username and password which shall be as the same as the
username and password of API server. Then you can view the video of channel 1. Note: only some
versions may support API server function. Please skip the following instructions if your DVR don’t
support it.
API Server
: You can log in the media player which supports the RTSP protocol by the username
and password here. Moreover, the third-party can further develop through API service.
Encryption type: Base64 and MD5 are optional.
Username: admin (it cannot be modified)
Password: Set it as needed.
Tips:
The username and password of API Server here cannot be used to log in NVR. It is
recommended to set the password of the API server different from the password of “admin” that is
used to log in NVR.
12.1.3 PPPoE Configuration
Click Start
→
Settings
→
Network
→
PPPoE to go to the interface as shown below. Check
“
Enable
”
in
“
PPPoE Settings
”
and then enter the username and password obtained from the dealer. Click
“
Apply
”
to save the settings.
