IPOX NVR N9000 Manual
IPOX NVR N9000 Manual
130
http://210.21.229.138 in the address bar and then press enter to go to the login interface. Enter the
username and password of the NVR in the interface and then click
“
Login
”
to go to the live
preview interface.
➢
Router Access
①
Click Start
→
Settings
→
Network
→
TCP/IP to go to the
“
TCP/IP
”
interface. Set the IP address,
subnet mask, gateway, preferred DNS and alternate DNS of the NVR.
②
Set the HTTP port (it is suggested to modify the HTTP port because the default HTTP port 80
might be taken up) and enable UPnP function in both the NVR and the router. If the UPnP function
is not available in the router, you need to forward the LAN IP address, HTTP port and server port of
the NVR to the router. Port mapping settings may be different in different routers, so please refer to
the user manual of the router for details.
③
Get the WAN IP address of the NVR from the router. Open a web browser on your computer,
enter the WAN IP address plus HTTP port like http://116.30.18.215:100 in the address bar and then
press enter to go to the login interface. Enter the username and password of the NVR in the
interface and then click “Login” to go to the live preview interface.
Note: If the WAN IP address is a dynamic IP address, it is necessary for you to use the domain name
to access the NVR. Click Start
→
Settings
→
Network
→
DDNS to set DDNS (see 12.1.4 DDNS
Configuration for details). By using DDNS function you can use the domain name plus HTTP port
like http://sunshine.dvrdydns.com:100 to access the NVR via internet.
13.4 Web Remote Control
The supported browsers of the remote surveillance are IE8/9/10/11, Firefox, Opera and Chrome
(available only for the versions lower than 45) in Windows system and Safari in MAC system.
When you access the NVR through web client for the first time, you need to download and install
the relative components for normal preview and playback. Please refer to the tips in the remote
interfaces for details. The buttons and icons on the top right corner of the remote interface are
introduced as follows.
Note
admin
: the current login username.
Logout
: click it to log out and return to the login interface.
Modify Password
: click it to change the password of the current login user. Input current password
and then set a new password in the popup window. Click “OK” to save the new password.
Local Settings
: click it to change the local settings. Set the snapshot number and click “Browse” to
set the snapshot path and record path as shown below. Click “Apply” to save the settings.
