IPOX NVR N9000 Manual
IPOX NVR N9000 Manual
20
②
Disconnect the power.
By mouse:
①
Click Start
→
Shutdown to pop up the Shutdown window. Select
“
Shutdown
”
in the
window. The unit will power off after a while by clicking the
“
OK
”
button.
②
Disconnect the power.
2.2 Remote Controller
①
It uses two AAA size batteries.
②
Open the battery cover of the remote controller.
③
Place batteries. Please take care the polarity (+ and -).
④
Replace the battery cover.
Key points to check in case the remote doesn’t work.
1. Check batteries polarity.
2. Check the remaining charge in the batteries.
3. Check IR controller sensor for any masking.
If it still doesn’t work, please change a new remote controller to try, or contact your dealers. You
can just turn the IR sensor of the remote controller towards the IR receiver of the NVR to control it
when you are controlling multiple devices by remote controller. There are two kinds of remote
controller. The interface of remote controller is shown as below.
