iPECS eMG800
Hardware Description and Installation Manual
Issue 1.8
80
The Button kit should be installed on the phone prior to making any connections to the phone. This simplifies
the installation.
To install the button kit for the LIP-9012 DSS, LIP-9024 DSS and LIP-9024 LSS
1)
First, assure the phone is NOT connected to power. For convenience, you may wish to remove the
handset and foot-stand; this simplifies the Button kit installation.
2)
On the right side of the phone, remove the Button kit cover.
3)
Align the Button kit and phone as shown in the drawing.
4)
Push the Button kit into the phone until the button kit is fully engaged.
5)
Insert the screws provided through the screw tabs in the Button kit and tighten the screws into the
phone. Do not over-tighten.
