INVT GD20-004G-2-EU, Operation Manual

Page: 77 / 168

Goodrive20-EU series VFD Function parameters
73
Function
code
Name Detailed instruction of parameters
Default
value
Modify
40: Channel 1 and channel 2 become abnormal
simultaneously (STL3)
41: Safety code FLASH CRC check fault (CrCE)
P07.33 Reference frequency of present fault 0.00Hz
●
P07.34 Ramps reference frequency of present fault 0.00Hz
●
P07.35 Output voltage of present fault 0V
●
P07.36 Output current of present fault 0.0A
●
P07.37 Bus voltage of present fault 0.0V
●
P07.38 Max. temperature of present fault 0.0°C
●
P07.39 Input terminals state of present fault 0
●
P07.40 Output terminals state of present fault 0
●
P07.41 Running frequency of the last fault 0.00Hz
●
P07.42 Ramps reference frequency of the last fault 0.00Hz
●
P07.43 Output voltage of the last fault 0V
●
P07.44 Output current of the last fault 0.0A
●
P07.45 Bus voltage of the last fault 0.0V
●
P07.46 Max. temperature of the last fault 0.0°C
●
P07.47 Input terminals state of the last fault 0
●
P07.48 Output terminals state of the last fault 0
●
P07.49 Reference frequency of the last but one fault 0.00Hz
●
P07.50 Ramp reference frequency of last but one fault 0.00Hz
●
P07.51 Output voltage of the last but one fault 0V
●
P07.52 Output current of the last but one fault 0.0A
●
P07.53 Bus voltage of the last but one fault 0.0V
●
P07.54 Max. temperature of the last but one fault 0.0°C
●
P07.55 Input terminals state of the last but one fault 0
●
P07.56 Output terminals state of the last but one fault 0
●
P08 Group Enhanced functions
P08.00
Acceleration
time 2
When terminals are used for acceleration/
deceleration time selection (see terminal function
settings in the P05 group), the four groups of
acceleration/deceleration time are selected
based on the states of Acceleration/deceleration
time selection terminal 1 (21) and
Acceleration/deceleration time selection terminal
2 (22).
Depend
on
model
○
P08.01
Deceleration
time 2
○
P08.02
Acceleration
time 3
P08.03
Deceleration
time 3
○