39
Document Number
DCV-00214
Date Released
Mar. 2017
Revision Number/Security level
R00 S2
Retrofit G6+InvencoLink GVR Encore 500S (US) Installation Guide
25. Remove the two Philips head screws on the cable-retention bracket on the OPT unit and remove
the bracket (keep the screws and the bracket).
26. Take the four cable ends routed in Step 24 and connect them to the G6 OPT:
a. Pass the Black low-voltage DC cable from the EZ0408 PSU plate through the square
hole in the cable-retention bracket, then plug it into the OPT:
b. Connect the EK0129 Red and EK0131 Yellow cables into the correct sockets on the OPT.
The port numbers on the InvencoLink for each cable (e.g. LAN-1, RS232-1) must match
the side you’re working on (e.g. Side A):
Remove screws
Cable-retention
bracket
Low-voltage DC
Cable
