37
Document Number
DCV-00214
Date Released
Mar. 2017
Revision Number/Security level
R00 S2
Retrofit G6+InvencoLink GVR Encore 500S (US) Installation Guide
17. Insert the two MS0101 screws ready from Step 15 into bushes on either side of the RFK Hatch
Panel. If there any bushes stripped or split or otherwise unusable discontinue the retro-fit process
and contact technical support for advice.
Tighten the screws with a ¼” nut driver.
18. Place the remaining eight MS0101 screws into the other bushes around the RFK Hatch Panel. If
there any bushes stripped or split or otherwise unusable discontinue the retro-fit process and
contact technical support for advice.
Tighten all screws with a ¼” nut driver.
19. Place three MS0150 #6-20 X 3/8", washer-headed screws in the three locations underneath the
CIM display window. Tighten the screws using a ¼” nut driver:
20. Through the front of the pump door insert and tighten five MS0149 Philips screws along the top
edge of the PPU panel.
MS0150
MS0149
