43
Document Number
DCV-00214
Date Released
Mar. 2017
Revision Number/Security level
R00 S2
Retrofit G6+InvencoLink GVR Encore 500S (US) Installation Guide
f.
Gather any excess wire of EK0130 and tidy it into the loom.
32. Replace the PPU selector buttons on the front of the Encore 500S Pump Door. Ensure you keep
the same order as noted in Disassembly Step 13. For each button:
a. Hook the top of the button over the top of the clip.
b. Swing the button downward until it sits on the clip.
c. Press HARD on the bottom of the button until it snaps loudly into place. Mind your fingers!
33. Tidy up any loose wiring, using cable ties to secure the wires.
34. For a double-sided installation, repeat steps 1-5 and 7-32.
35. Close up the dispenser. For each open Side:
a. Lift the Encore 500S Pump Door open-latch to release the door:
b. Then close the Pump Door carefully, ensuring no cables are pinched. If cables will be
pinched, re-open the Pump Door and secure and/or re-arrange the cables securely. Then
continue closing the door.
c. Lock the top and re-latch the bottom of the door.
Lift this
latch
