18
Document Number
DCV-00214
Date Released
Mar. 2017
Revision Number/Security level
R00 S2
Retrofit G6+InvencoLink GVR Encore 500S (US) Installation Guide
16.
Remove the four #6-
3/8” sheet-metal screws fastening the Door Node to the back side of the
Dispenser Door. Save these screws for later re-use during installation. Carefully set the Door
Node inside the electronics cavity out of the way. Use a soft anti-static cloth to protect the
electronics and displays from damage. Undo any necessary cable restraints that may be present.
(Fig 1.14)
Fig 1.14
–
Location of Door Node screws
17.
Remove and discard the three #6 self-tapping screws and washers immediately below the CIM
panel Display Window, and the 10 #6-
1/2” self-tapping screws fastening the CIM panel to the
Dispenser Door. (Fig 1.15)
Fig 1.15
–
Location of CIM Panel screws
18.
Remove the CIM Panel along with any remaining attached components. These can be discarded.
They will not be reinstalled. (Fig 1.16 a,b)
