40
Document Number
DCV-00214
Date Released
Mar. 2017
Revision Number/Security level
R00 S2
Retrofit G6+InvencoLink GVR Encore 500S (US) Installation Guide
c.
Clip the green earth cable from the EZ0408 PSU plate onto the ¼” tab on the OPT paper-
holder frame:
d. Re-install the screws (saved in Step 25) on the cable-retention bracket, and tighen them
after ensuring the power plug is correctly seated:
27. Gather the RED, YELLOW, BLACK and GREEN/YELLOW cables from the above steps into a
cable-tie on the upper left rear (as viewed from its rear) of the G6 OPT:
OPT Printer
¼” Earth Tab
Red into Black socket,
Yellow into Silver socket
