IntesisBox
®
KNX - Daikin A.C. (SKY & VRV line)
User's manual r1.0 eng
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
IntesisBox
®
is a registered trademark of Intesis Software SL
URL
Email
tel
http://www.intesis.com
[email protected]
+34 938047134
27 / 66
o
If set to
“no”
the objects will not be shown.
o
If set to
“yes”
the
Status_ Fan Speed
objects for Speed 1, Speed 2 and Speed 3 (if
available) will appear. When a Fan Speed is enabled, a
“1”
value is returned through its
bit-type object.
4.4.6 Enable use of Text object for Fan Speed
This parameter shows/hides the
Status_ Fan Speed Text
communication object.
o
If set to
“no”
the object will not be shown.
o
If set to
“yes”
the
Status_ Fan Speed Text
object will appear. Also, in the parameters,
will be shown two (or three, depending on the number of fan speeds selected) text fields,
one for each Fan Speed, that will let modify the text string displayed by the
Status_ Fan
Speed Text
when changing a fan speed.
Figure 4.15
Parameter detail
4.4.7 Enable use of Legacy_ obj for Fan Speed
This parameter shows/hides the
Legacy_ Fan Speed
communication object.
o
If set to
“no”
the object will not be shown.
o
If set to
“yes”
the
Legacy_ Fan Speed
object will appear. This object lets change the
indoor unit Fan Speed but it uses a different data type. It is used to maintain compatibility
with old gateway models.
