IntesisBox
®
KNX - Daikin A.C. (SKY & VRV line)
User's manual r1.0 eng
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
IntesisBox
®
is a registered trademark of Intesis Software SL
URL
Email
tel
http://www.intesis.com
[email protected]
+34 938047134
41 / 66
4.8 Switch-Off Timeouts Configuration dialog
Figure 4.31
Default Switch-Off Timeouts Configuration dialog
All the parameters in this section are related with the timeout properties and communication
objects.
4.8.1 Enable use of Open Window / Switch off timeout function
This parameter shows/hides the
Control_ Switch Off Timeout
communication object which
lets you Start/Stop a timeout to switch off the indoor unit.
o
If set to
“no”
the object will
not be shown.
o
If set to
“yes”
the
Control_ Switch Off Timeout
object and new parameters will appear.
If a
“1”
value is sent to this object, and the indoor unit is already turned on, the switch-
off timeout will begin. If a
“0”
value is sent to this object, the switch-off timeout will stop.
Figure 4.32
Parameter detail
AC switch-off timeout (min)
This parameter lets you select how much time (in minutes) to wait before switching
off the indoor unit.
DPT for Window / Switch-off timeout
