Intermec Sabre 1555 RFID, Service Manual

Page: 44 / 65

Sabre 1555 RFID and Bar Code Reader Service Manual
2-30
Reassembling the 1555
If you opened the case to replace parts in the 1555, follow these procedures to
reassemble the 1555 and close the case.
You need this tool:
•
Torque driver with a Torx bit
To reassemble the 1555
1. Route the flex cables as shown in the next illustration.
2.4 GHz
12-pin
8-pin
10-pin
915 MHz
Route all
flex cables
to this side
2. Position the upper case assembly next to the lower shell and handle.