Intermec Sabre 1555 RFID, Service Manual

Page: 39 / 65

Replacing Parts in the 1555
2-25
2
5. Remove the two Torx screws on the underside of the RF board assembly.
2.4 GHz
shown here
You can now remove the shield and chassis assembly (915 MHz 1555) or the
antenna assembly (2.4 GHz 1555).
6. Remove the two Phillips screws on the underside of the assembly and remove the
scan engine.
Shield and chassis
assembly
(915 MHz)
Antenna assembly
(2.4 GHz)
7. Do one of the following:
•
To replace the shield and chassis assembly in the 915 MHz 1555, place the scan
engine in the new shield and chassis assembly.
•
To replace the antenna assembly in the 2.4 GHz 1555, place the scan engine in
the new antenna assembly.