Intermec Sabre 1555 RFID, Service Manual

Page: 17 / 65

Replacing Parts in the 1555
2-3
2
This chapter explains how to replace parts in the 1555.
Replacing Parts
When you have determined which parts need to be replaced, follow the procedures in
this chapter to disassemble and replace parts in the 1555.
Removing and Replacing the Extender Wedge (PDT 1555
only)
To replace the extender wedge, you need:
•
Wedge assembly (P/N 070326-001)
You need these tools:
•
Torque driver with a #1 Phillips bit
•
Tweezers
To remove the extender wedge
1. Remove the battery pack.
2. Remove the Phillips head screw in the extender wedge on the bottom of the handle.