Intermec Sabre 1555 RFID, Service Manual

Page: 46 / 65

Sabre 1555 RFID and Bar Code Reader Service Manual
2-32
7. Place a small piece of Kapton tape over the 8-pin connector and flex cable to secure
them.
8. Slide the excess 8-pin flex cable into the gap between the RF board and the digital
board. Fold the excess 12-pin flex cable over the top of the digital board.
12-pin flex cable
installed and
folded over
8-pin flex cable
installed on back
of scan engine
9. Insert the 10-pin flex cable into the connector on the keyboard PCB. The flex cable
contacts should face the center of the 1555.
10-pin flex cable
Contacts to this
side of connector